[j-nsp] vMX SR-IOV

[Diogo Montagner]

Stefan,

You need to use the modified version of the Intel drivers that are shipped
with the VMX.

Thanks

On Fri, 24 Mar 2017 at 08:18, Stefan Stoyanov <sonyxwing at gmail.com> wrote:

> Hi everyone,
>
> Does anyone have an idea, why vMX SR-IOV vlan-tagging isn't working?
> If I use "unit 0" without any VLANs configured on the interface everything
> is okay.
>
> Is it possible to be something related to the NIC which I am using?
> Also, do I need to disable some of the following feature ( or all of them
> )?
>
> rx-vlan-offload: on
> tx-vlan-offload: on
> rx-vlan-filter: on
>
>
>
> *0a:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+
> Network Connection (rev 01)*
> *        Subsystem: Intel Corporation Ethernet Server Adapter X520-2*
> *        Physical Slot: 2*
> *        Flags: bus master, fast devsel, latency 0, IRQ 68*
> *        Memory at e7080000 (64-bit, non-prefetchable) [size=512K]*
> *        I/O ports at 5020 [size=32]*
> *        Memory at e7304000 (64-bit, non-prefetchable) [size=16K]*
> *        Capabilities: [40] Power Management version 3*
> *        Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+*
> *        Capabilities: [70] MSI-X: Enable+ Count=64 Masked-*
> *        Capabilities: [a0] Express Endpoint, MSI 00*
> *        Capabilities: [100] Advanced Error Reporting*
> *        Capabilities: [140] Device Serial Number 00-1b-21-ff-ff-89-48-f4*
> *        Capabilities: [150] Alternative Routing-ID Interpretation (ARI)*
> *        Capabilities: [160] Single Root I/O Virtualization (SR-IOV)*
> *        Kernel driver in use: ixgbe*
> *        Kernel modules: ixgbe*
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
-- 
./diogo -montagner
JNCIE-SP 0x41A