[j-nsp] RES: RES: QFX 5100 and Q-in-Q

[Alexandre Guimaraes]

Chuck, 


   Could you please share portion of your QinQ configuration?  In my tests, facing customer side, used:

set vlans S-VLAN-200 vlan-id 200
set vlans S-VLAN-200 interface ge-0/0/14.200
 
set interfaces ge-0/0/14 flexible-vlan-tagging
set interfaces ge-0/0/14 native-vlan-id 200
set interfaces ge-0/0/14 mtu 6000
set interfaces ge-0/0/14 encapsulation extended-vlan-bridge
set interfaces ge-0/0/14 unit 200 vlan-id-list 10-30
set interfaces ge-0/0/14 unit 200 input-vlan-map push
set interfaces ge-0/0/14 unit 200 output-vlan-map pop


Even you can encapsulates customer vlan inside a service vlan, all layer 2 protocols will not pass. 



________________________________________
De: juniper-nsp [juniper-nsp-bounces at puck.nether.net] em nome de Chuck Anderson [cra at WPI.EDU]
Enviado: sexta-feira, 24 de março de 2017 18:33
Para: juniper-nsp at puck.nether.net
Assunto: Re: [j-nsp] RES:  QFX 5100 and Q-in-Q

I had to load 14.1X53-D40 to have a basic working Q-in-Q config.  D35
was broken in some fundamental way.

On Fri, Mar 24, 2017 at 04:31:56PM +0000, Alexandre Guimaraes wrote:
> Alain,
>
>       As far i know, QinQ - L2TP does not work at QFX5100.
>
> Att.,
> Alexandre
>
> ________________________________________
> De: juniper-nsp [juniper-nsp-bounces at puck.nether.net] em nome de Alain Hebert [ahebert at pubnix.net]
> Enviado: sexta-feira, 24 de março de 2017 13:07
> Para: juniper-nsp at puck.nether.net
> Assunto: [j-nsp] QFX 5100 and Q-in-Q
>
>      Well,
>
>      We're having all sort of massive failure making Q-in-Q works in our
> QFX5100 in standard and VCF mode... and that with 14.x, 15x, 16.x, 17.x
>
>      Such a simple thing should not take 1 week of back & forth with JTAC.
>
>      Anyone have some experience to share on that subject?
>
>      Thank.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp