[j-nsp] Reset DSCP on ingress

Victor Sudakov vas at mpeks.tomsk.su
Wed May 3 05:59:59 EDT 2017

Dear Colleagues,

What is the easiest method of resetting the dscp value in incoming
packets when the incoming port is configured for "family ethernet-switching"?

If the port were in "family inet", I would use the firewall, but the
"family ethernet-switching" firewall does not seem to have a means to
set dscp.

Thanks a lot in advance.

The device is EX4200-24T, 12.3R6.6

Victor Sudakov,  VAS4-RIPE, VAS47-RIPN

More information about the juniper-nsp mailing list