[j-nsp] BGP PIC for inet6

[Jay Ford]

Thanks for that.

By the way, this seems to work also, which is more consistent between IPv4 & 
IPv6:

    set routing-options rib inet.0 protect core
    set routing-options rib inet6.0 protect core

________________________________________________________________________
Jay Ford, Network Engineering, University of Iowa

On Tue, 21 Nov 2017, david.roy at orange.com wrote:
> For ipv6
>
> set routing-options rib inet6.0 protect core
>
> For ipv4
>
> set routing-options protect core
>
> David Roy
> IP/MPLS NOC engineer - Orange France
> Ph. : +33 2 99 28 57 66
> Mob. : +33 6 85 52 22 13
> SkypeID : davidroy.35
> david.roy at orange.com
>  
> JNCIE x3 (SP #703 ; ENT #305 ; SEC #144)
>
>
> -----Message d'origine-----
> De : juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] De la part de Jay Ford
> Envoyé : mardi 21 novembre 2017 22:07
> À : juniper-nsp at puck.nether.net
> Objet : [j-nsp] BGP PIC for inet6
>
> There is Juniper documentation acknowledging the use case of BGP PIC for inet & inet6 unicast, but I can't find a way to enable it for inet6 at Junos 16.2R2.8.  Pointers to how to do so would be cool, but confirmation that it isn't supported (yet) would also be appreciated.
>
> ________________________________________________________________________
> Jay Ford, Network Engineering, University of Iowa