[j-nsp] ACX5048 - 40 gbps ER 40 km optic
Pavel Lunin
plunin at gmail.com
Wed Oct 4 18:01:56 EDT 2017
The command you are looking for is called "show interfaces diagnostics
optics".
2017-10-04 21:20 GMT+02:00 Aaron Gould <aaron1 at gvtc.com>:
> I put this into my ACX5048 in the lab today. actually 2 of them.
> QSFP+-40G-ER4 (aka QSFPP-40GBASE-ER4) SMF 40 km 1310 nm optic
>
>
>
> Optic is seen in cli, but I see no led's on chassis and when I plug them
> into each other, interfaces stay up/down.
>
>
>
> Is there something I need to do to make this 40 gig optic work in the
> ACX5048 (JUNOS 15.1X54-D61.6) ?
>
>
>
> {master:0}
> agould at eng-lab-5048-2> show interfaces terse | grep et-
> et-0/0/48 up down
> et-0/0/49 up down
>
> {master:0}
> agould at eng-lab-5048-2> show interfaces et-0/0/48
> Physical interface: et-0/0/48, Enabled, Physical link is Down
> Interface index: 657, SNMP ifIndex: 582
> Link-level type: Ethernet, MTU: 1514, LAN-PHY mode, Speed: 40Gbps, BPDU
> Error: None, MAC-REWRITE Error: None, Loopback: Disabled,
> Source filtering: Disabled, Flow control: Disabled, Media type: Fiber
> Device flags : Present Running Down
> Interface flags: Hardware-Down SNMP-Traps Internal: 0x4000
> Link flags : None
> CoS queues : 8 supported, 8 maximum usable queues
> Current address: 20:4e:71:45:d3:d3, Hardware address: 20:4e:71:45:d3:d3
> Last flapped : 2017-10-04 10:26:33 CDT (00:09:14 ago)
> Input rate : 0 bps (0 pps)
> Output rate : 0 bps (0 pps)
> Active alarms : LINK
> Active defects : LINK
> Interface transmit statistics: Disabled
>
> {master:0}
> agould at eng-lab-5048-2> show interfaces et-0/0/49
> Physical interface: et-0/0/49, Enabled, Physical link is Down
> Interface index: 658, SNMP ifIndex: 583
> Link-level type: Ethernet, MTU: 1514, LAN-PHY mode, Speed: 40Gbps, BPDU
> Error: None, MAC-REWRITE Error: None, Loopback: Disabled,
> Source filtering: Disabled, Flow control: Disabled, Media type: Fiber
> Device flags : Present Running Down
> Interface flags: Hardware-Down SNMP-Traps Internal: 0x4000
> Link flags : None
> CoS queues : 8 supported, 8 maximum usable queues
> Current address: 20:4e:71:45:d3:d7, Hardware address: 20:4e:71:45:d3:d7
> Last flapped : 2017-10-04 10:27:53 CDT (00:07:56 ago)
> Input rate : 0 bps (0 pps)
> Output rate : 0 bps (0 pps)
> Active alarms : LINK
> Active defects : LINK
> Interface transmit statistics: Disabled
>
> {master:0}
> agould at eng-lab-5048-2> show chassis hardware
> Hardware inventory:
> Item Version Part number Serial number Description
> Chassis (removed...) ACX5048
> Pseudo CB 0
> Routing Engine 0 BUILTIN BUILTIN ACX5K Routing
> Engine
> FPC 0 REV 07 650-060546 (removed...) ACX5048
> CPU BUILTIN BUILTIN FPC CPU
> PIC 0 BUILTIN BUILTIN 48x10G-6x40G
>
> Xcvr 48 REV 01 740-059185 (removed...) QSFP+-40G-ER4
> Xcvr 49 REV 01 740-059185 (removed...) QSFP+-40G-ER4
> Power Supply 0 REV 04 740-043886 (removed...) JPSU-650W-DC-AFO
> Power Supply 1 REV 04 740-043886 (removed...) JPSU-650W-DC-AFO
> Fan Tray 0 ACX5K Fan Tray 0,
> Front to Back Airflow - AFO
> Fan Tray 1 ACX5K Fan Tray 1,
> Front to Back Airflow - AFO
> Fan Tray 2 ACX5K Fan Tray 2,
> Front to Back Airflow - AFO
> Fan Tray 3 ACX5K Fan Tray 3,
> Front to Back Airflow - AFO
> Fan Tray 4 ACX5K Fan Tray 4,
> Front to Back Airflow - AFO
>
>
>
>
> {master:0}
> agould at eng-lab-5048-2> show chassis pic pic-slot 0 fpc-slot 0
> FPC slot 0, PIC slot 0 information:
> Type 48x10G-6x40G
> State Online
> PIC version 2.7
> Uptime 99 days, 23 hours, 26 minutes, 3 seconds
>
> PIC port information:
> Fiber Xcvr vendor Wave-
> Xcvr
> Port Cable type type Xcvr vendor part number length
> Firmware
> 48 40GBASE ER4 SM JUNIPER-FINISAR FTL4E1QE1C-J3 1301 nm
> 0.0
> 49 40GBASE ER4 SM JUNIPER-FINISAR FTL4E1QE1C-J3 1301 nm
> 0.0
>
>
>
> - Aaron
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
More information about the juniper-nsp
mailing list