[j-nsp] Routing Engine upgrade

[Sachin Rai]

I am assuming this also includes SCB. If that's the case then its ok and further you need to check on SCBE (New one) and currently installed MPC/DPC compatibility.

If not then please check with Juniper if RE-S-1800x4 supports SCB (Old one) (my guess is it will not) and then MPC/DPC compatibility.

________________________________
From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> on behalf of craig washington <craigwashington01 at hotmail.com>
Sent: Wednesday, October 18, 2017 10:17:36 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Routing Engine upgrade

Hello all,


Kind of a general question but just wanted to double check any gotchas.


We are upgrading some of our routers from RE-S-2000 to RE-S-1800x4.

This should just be putting the new on in the backup, letting it sync and upgrade software as needed and then doing switch over, then performing same step on the primary.

Is there anything that I am missing, are there any odd issues with the RE-S-2000 that could cause a crash of some sort?


Thanks


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fjuniper-nsp&data=02%7C01%7Ca_hadhoud%40hotmail.com%7Ca6f6c638631b4767521908d5166d23fc%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636439580370731950&sdata=8EsFH0DqNhkthRrnN6ITE3r1UvLOapCnaOrpFcYuIoQ%3D&reserved=0