[j-nsp] Routing Engine upgrade

[Luis Balbinot]

If possible try aiming for a full system restart, it will be less
painful and very straightforward (you'll need at least a one hour
window). Your PFEs will go through a warm reboot anyway if you upgrade
the software on the new REs. But please confirm that with your SE.

On Wed, Oct 18, 2017 at 2:47 PM, craig washington
<craigwashington01 at hotmail.com> wrote:
> Hello all,
>
>
> Kind of a general question but just wanted to double check any gotchas.
>
>
> We are upgrading some of our routers from RE-S-2000 to RE-S-1800x4.
>
> This should just be putting the new on in the backup, letting it sync and upgrade software as needed and then doing switch over, then performing same step on the primary.
>
> Is there anything that I am missing, are there any odd issues with the RE-S-2000 that could cause a crash of some sort?
>
>
> Thanks
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp