[j-nsp] juniper-nsp Digest, Vol 179, Issue 20

Brijesh Patel brju.patel at gmail.com
Sat Oct 21 12:05:05 EDT 2017


Hi

Is MX router has firewall filter on loop back?

If so pleae make sure ldp related port and IP address allow

Thanks

Brijesh

On Saturday, October 21, 2017, <juniper-nsp-request at puck.nether.net> wrote:

> Send juniper-nsp mailing list submissions to
>         juniper-nsp at puck.nether.net <javascript:;>
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://puck.nether.net/mailman/listinfo/juniper-nsp
> or, via email, send a message with subject or body 'help' to
>         juniper-nsp-request at puck.nether.net <javascript:;>
>
> You can reach the person managing the list at
>         juniper-nsp-owner at puck.nether.net <javascript:;>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of juniper-nsp digest..."
>
>
> Today's Topics:
>
>    1. Re: l2circuit down one side/up another (Rafael Ganascim)
>    2. Re: l2circuit down one side/up another (Alexandre Guimaraes)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 21 Oct 2017 07:53:16 -0200
> From: Rafael Ganascim <rganascim at gmail.com <javascript:;>>
> To: Caio <caiot5 at gmail.com <javascript:;>>
> Cc: juniper-nsp <juniper-nsp at puck.nether.net <javascript:;>>
> Subject: Re: [j-nsp] l2circuit down one side/up another
> Message-ID:
>         <
> CAD4ZOMx2nc0u78L5ORTiWeKwQi58tF2cH07Z1q4iY505mTKzbQ at mail.gmail.com
> <javascript:;>>
> Content-Type: text/plain; charset="UTF-8"
>
> Just more checks:
>
> How is the MPLS forwarding table for the negotiated Labels for loopback and
> l2circuit?
> Are you using label PHP? Can you switch It off?
> Is the LDP adjacency up and exchanging labels?
> Are the l2circuit neighbors configured between loopback interfaces?
>
> Regards,
>
>
>
>
> Em 20 de out de 2017 8:26 AM, "Caio" <caiot5 at gmail.com <javascript:;>>
> escreveu:
>
> > Hello people,
> >
> > There's a weird problem I would like to share with you.
> > I have the following scenario:
> >
> > MX104 -> L2 SW (1) -> L2 SW (2) -> MX80
> >
> > Both L2 SW are Extreme X460 and they're doing nothing except forwarding
> > frames at layer 2.
> >
> > In order to simplify our topology, we have changed the MX104 uplink to L2
> > SW (2) so the topology went to MX104 -> L2 SW (2) -> MX80.
> >
> > After that, the BGP sessions went up and all the traffic has returned as
> > expected, however I have three l2circuit connections (vlan-ccc mode) and
> > they went to "Down (OL)" status at one side and Up at another. In order
> to
> > reestablish them we had to do a rollback of the physical changes we did.
> >
> > As it just don't make any sense to me, I summon you experts to help me
> with
> > that, so we can try to figure out what went wrong.
> >
> > Additional details: I'm using LDP signaling at both sides. It' a point to
> > point L3 connection, so I have the loopback interfaces configured at both
> > sides and a /30 between them, also I have static routes to reach their
> > loopback interface's addresses.
> >
> > Any help will be appreciated.
> >
> > Cheers,
> > Caio
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 21 Oct 2017 10:42:21 +0000
> From: Alexandre Guimaraes <alexandre.guimaraes at ascenty.com <javascript:;>>
> To: Rafael Ganascim <rganascim at gmail.com <javascript:;>>
> Cc: Caio <caiot5 at gmail.com <javascript:;>>, juniper-nsp <
> juniper-nsp at puck.nether.net <javascript:;>>
> Subject: Re: [j-nsp] l2circuit down one side/up another
> Message-ID: <727F7B43-688C-4DBF-9A6D-C7B6B32C1E5F at ascenty.com
> <javascript:;>>
> Content-Type: text/plain; charset="utf-8"
>
> Caio,
>
> Have you check something?
>
> Are these extremes let the signaling pass thru?
>
> att
> Alexandre
>
> Em 21 de out de 2017, ?(s) 07:54, Rafael Ganascim <rganascim at gmail.com
> <javascript:;><mailto:rganascim at gmail.com <javascript:;>>> escreveu:
>
> Just more checks:
>
> How is the MPLS forwarding table for the negotiated Labels for loopback and
> l2circuit?
> Are you using label PHP? Can you switch It off?
> Is the LDP adjacency up and exchanging labels?
> Are the l2circuit neighbors configured between loopback interfaces?
>
> Regards,
>
>
>
>
> Em 20 de out de 2017 8:26 AM, "Caio" <caiot5 at gmail.com <javascript:;>
> <mailto:caiot5 at gmail.com <javascript:;>>> escreveu:
>
> Hello people,
>
> There's a weird problem I would like to share with you.
> I have the following scenario:
>
> MX104 -> L2 SW (1) -> L2 SW (2) -> MX80
>
> Both L2 SW are Extreme X460 and they're doing nothing except forwarding
> frames at layer 2.
>
> In order to simplify our topology, we have changed the MX104 uplink to L2
> SW (2) so the topology went to MX104 -> L2 SW (2) -> MX80.
>
> After that, the BGP sessions went up and all the traffic has returned as
> expected, however I have three l2circuit connections (vlan-ccc mode) and
> they went to "Down (OL)" status at one side and Up at another. In order to
> reestablish them we had to do a rollback of the physical changes we did.
>
> As it just don't make any sense to me, I summon you experts to help me with
> that, so we can try to figure out what went wrong.
>
> Additional details: I'm using LDP signaling at both sides. It' a point to
> point L3 connection, so I have the loopback interfaces configured at both
> sides and a /30 between them, also I have static routes to reach their
> loopback interface's addresses.
>
> Any help will be appreciated.
>
> Cheers,
> Caio
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> <mailto:juniper-nsp at puck.nether.net <javascript:;>>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> <mailto:juniper-nsp at puck.nether.net <javascript:;>>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> juniper-nsp mailing list
> juniper-nsp at puck.nether.net <javascript:;>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> ------------------------------
>
> End of juniper-nsp Digest, Vol 179, Issue 20
> ********************************************
>


More information about the juniper-nsp mailing list