[j-nsp] Using a QFX5100 without QFabric?

Aaron Gould aaron1 at gvtc.com
Tue Oct 24 10:44:30 EDT 2017


Not to change subject too much, but, In case you are wanting to extend your
mpls cloud (I'm assuming your MX core is mpls-enabled) further out into the
aggregation/access edge, you could go with the qfx-5100 cousin... acx5048.
I've been pretty pleased with them.

I've deployed 30 or 40 of these now in my network with as cisco asr9k core.

-Aaron




More information about the juniper-nsp mailing list