[j-nsp] SRX - CPU utilization exceeds

sameer mughal pcs.sameer1 at gmail.com
Sat Sep 16 01:48:47 EDT 2017


Hi,

Can anyone please review the mentioned below logs and advice me Is this
issue critical and how can I fix this ?


Model: srx220h2
JUNOS Software Release [12.1X46-D35.1]

Sep 12 06:42:34  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=93
Sep 12 06:42:37  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=85
Sep 12 09:24:17  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=89
Sep 12 09:24:21  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=95
Sep 12 09:52:53  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=90
Sep 12 10:35:32  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=90
Sep 12 11:07:35  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=89
Sep 13 04:41:36  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=87
Sep 13 10:25:12  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=87
Sep 13 10:26:54  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=99
Sep 14 06:19:27  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=92
Sep 15 10:18:53  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=95
Sep 15 12:16:52  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=87
Sep 16 04:39:54  sr-rtr PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC
0 CPU utilization exceeds threshold, current value=91

======
show chassis routing-engine
Routing Engine status:
    Temperature                 43 degrees C / 109 degrees F
    Total memory              2048 MB Max  1004 MB used ( 49 percent)
      Control plane memory    1088 MB Max   392 MB used ( 36 percent)
      Data plane memory        960 MB Max   614 MB used ( 64 percent)
    CPU utilization:
      User                       4 percent
      Background                 0 percent
      Kernel                     9 percent
      Interrupt                  0 percent
      Idle                      87 percent
    Model                          RE-SRX220H2
    Serial ID                      ACPS8752
    Start time                     2017-09-07 15:00:58 UTC
    Uptime                         8 days, 14 hours, 41 minutes, 12 seconds
    Last reboot reason             0x1:power cycle/failure
    Load averages:                 1 minute   5 minute  15 minute
                                       0.02       0.08       0.08
===============

show security monitoring fpc 0
FPC 0
  PIC 0
    CPU utilization          :   39 %
    Memory utilization       :   64 %
    Current flow session     : 18000
    Current flow session IPv4: 18000
    Current flow session IPv6:    0
    Max flow session         : 524288
Total Session Creation Per Second (for last 96 seconds on average):  378
IPv4  Session Creation Per Second (for last 96 seconds on average):  378
IPv6  Session Creation Per Second (for last 96 seconds on average):    0


More information about the juniper-nsp mailing list