[j-nsp] SRX300 - How much MPLS can be done with that platform?

[Pavel Lunin]

You can selectively disable stateful processing using firewall filters but
you can't combine stateful and mpls for a given packet except with
recirculation.


пт, 24 авг. 2018 г., 20:09 Aaron Gould <aaron1 at gvtc.com>:

> Is that true?  I was wondering if stateful mode does no mpls at all. I was
> recently wondering if I could use a Juniper SRX firewall in its purest
> firewall form, I think known as stateful mode, with MPLS encapsulation and
> services terminating directly inside of the SRX
>
> Let me know , thanks
>
> Aaron
>
> > On Aug 24, 2018, at 10:12 AM, Pavel Lunin <plunin at gmail.com> wrote:
> >
> > In stateless mode — as much as the cpus and ram can accommodate.
> > Performance and scaling should be somewhat near the IP packet-mode
> numbers,
> > and most major features are there.
> >
> > In stateful mode — zero, if I didn't miss something.
> >
> > пт, 24 авг. 2018 г., 16:31 Alain Hebert <ahebert at pubnix.net>:
> >
> >>     Curious to know.
> >>
> >>     The commands are there...  Most of the things seems functional up
> >> to LDP.
> >>
> >>     Have a good day.
> >>
> >> --
> >> -----
> >> Alain Hebert                                ahebert at pubnix.net
> >> PubNIX Inc.
> >> 50 boul. St-Charles
> >> P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
> >> Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443
> >>
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>