[j-nsp] SRX300

[Ola Thoresen]

I believe the usb console is disabled by default, and you need to use a 
regular (rs232) console cable for the initial configuration. At least it 
was set up that way in earlier releases.
You can then enable the USB console in the configuration.

On 2 December 2018 11:03:59 Mohammad Khalil <eng.mssk at gmail.com> wrote:

> Dears
> I have a new Juniper SRX300
> I have downloaded the driver for it (mini USB) and tried to access ti via
> console with no luck
> The console shows connected but nothing appears on the terminal
> Tried to disable flow control and the same
> Am using Putty
>
> Any advice ?!
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp