[j-nsp] MPC7 / QSFP28 I2C issue

Aaron Gould aaron1 at gvtc.com
Fri Dec 7 15:21:23 EST 2018


Not sure if it helps, but here's what I'm running successfully in mine


{master}
agould at blvr-960> show version | grep "Junos:|model"
Model: mx960
Junos: 17.4R1-S2.2


{master}
agould at blvr-960>

{master}
agould at blvr-960> show chassis hardware | grep "mrate|100G"
FPC 0            REV 43   750-056519   (removed)          MPC7E 3D MRATE-12xQSFPP-XGE-XLGE-CGE
  PIC 0                   BUILTIN      BUILTIN           MRATE-6xQSFPP-XGE-XLGE-CGE
    Xcvr 2       REV 01   740-058734   (removed)       QSFP-100GBASE-SR4
    Xcvr 5                NON-JNPR     (removed)  QSFP-100GBASE-LR4
  PIC 1                   BUILTIN      BUILTIN           MRATE-6xQSFPP-XGE-XLGE-CGE
FPC 11           REV 43   750-056519   (removed)          MPC7E 3D MRATE-12xQSFPP-XGE-XLGE-CGE
  PIC 0                   BUILTIN      BUILTIN           MRATE-6xQSFPP-XGE-XLGE-CGE
    Xcvr 2       REV 01   740-058734   (removed)       QSFP-100GBASE-SR4
  PIC 1                   BUILTIN      BUILTIN           MRATE-6xQSFPP-XGE-XLGE-CGE


-Aaron




More information about the juniper-nsp mailing list