[j-nsp] SRX WAN DHCP

[Mohammad Khalil]

And I cannot find the command : set system services dhcp propagate-settings

On Wed, 12 Dec 2018 at 11:12, Mohammad Khalil <eng.mssk at gmail.com> wrote:

> I have followed the below link:
>
> https://www.redelijkheid.com/blog/2017/2/13/juniper-srx-and-dhcp-client-challenge
>
> As per many articles specify that the TTL might decrease (even though on
> the old box , this is was not the case) and again with no luck
>
> I have configured my ge-0/0/0 interface like below:
> set interfaces ge-0/0/0 unit 0 family inet dhcp-client update-server
>
> Any advice mates ?!
>
>
>
> On Mon, 10 Dec 2018 at 17:55, Eldon Koyle <
> ekoyle+puck.nether.net at gmail.com> wrote:
>
>> I think the commands to check on the dhcp client are show dhcp client
>> binding and show dhcp client statistics.
>>
>> There are a lot of bugs in -D70.
>>
>> --
>> Eldon
>>
>> On Mon, Dec 10, 2018 at 8:42 AM Mohammad Khalil <eng.mssk at gmail.com>
>> wrote:
>>
>>> I cannot do the upgrade right now as I have to do the setup so quickly
>>> What features should I enable ?
>>>
>>> On Mon, 10 Dec 2018 at 17:40, Eldon Koyle <
>>> ekoyle+puck.nether.net at gmail.com> wrote:
>>>
>>>> The firmware that ships on the SRX is missing a lot of features.  I
>>>> would recommend upgrading to the latest version in that code train, which
>>>> is 15.1X49-D150.
>>>>
>>>> --
>>>> Eldon
>>>>
>>>> On Mon, Dec 10, 2018 at 1:00 AM Mohammad Khalil <eng.mssk at gmail.com>
>>>> wrote:
>>>>
>>>>> Hello all
>>>>> I have an old SRX which I configured it is WAN IP address using the
>>>>> below
>>>>> command:
>>>>> set interfaces ge-0/0/0 unit 0 family inet address dhcp
>>>>>
>>>>> Now , I have replaced the box with a newer one (srx300 15.1X49-D70.3)
>>>>> but I
>>>>> cannot find the command itself
>>>>> I have tried the below:
>>>>> set interfaces ge-0/0/0 unit 0 family inet dhcp-client
>>>>> With no luck !
>>>>> When I try to check :
>>>>> show system services ? (no DHCP option is available)
>>>>> I have configured:
>>>>> set security zones security-zone untrust interfaces ge-0/0/0.0
>>>>> host-inbound-services dhcp
>>>>>
>>>>> Any ideas guys?
>>>>>
>>>>> BR,
>>>>> Mohammad
>>>>> _______________________________________________
>>>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>>>
>>>>