[j-nsp] L2ALD_MAC_MOVE_NOTIFICATION

[Brijesh Patel]

Hi Scott,

Issue is similar but there is no solution ? Or not on juniper website which
mention in that blog.

So lost


Thanks

Brijesh
On Friday, February 23, 2018, Scott Harvanek <scott.harvanek at login.com>
wrote:

> https://puck.nether.net/pipermail/juniper-nsp/2014-November/029561.html
>
> > On Feb 22, 2018, at 10:37 PM, Nikolas Geyer <nik at neko.id.au> wrote:
> >
> > You’ve probably got a layer 2 loop in your topology somewhere. OSPF
> probably went down due to the RE CPU utilization going through the roof.
> >
> > Sent from my iPhone
> >
> >> On 22 Feb 2018, at 11:23 pm, Brijesh Patel <brju.patel at gmail.com>
> wrote:
> >>
> >> Hello Friends,
> >>
> >> We have switch EX4300 which is connected to EX4500. .
> >>
> >> Receving an erroe message : *2ald[1299]: L2ALD_MAC_MOVE_NOTIFICATION:
> MAC
> >> Moves detected in the system*
> >>
> >> *and system went down and ospf flap . ANy idea ?*
> >> _______________________________________________
> >> juniper-nsp mailing list juniper-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/juniper-nsp
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>