[j-nsp] SRX 550 BGP Flapping
sameer mughal
pcs.sameer1 at gmail.com
Tue Jan 30 01:30:16 EST 2018
Thanks for the reply.
Can you please help me how can I check and correct this ?
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
Virus-free.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Tue, Jan 30, 2018 at 11:25 AM, Emille Blanc <emille at abccommunications.com
> wrote:
> You might want to check the MTU of the path, or ensure that pmtu is
> enabled.
> It looks like you're using a redundant ethernet interface (reth). If
> you're using a non-standard MTU, make sure it is set correctly for its
> member interface(s).
>
> ________________________________________
> From: juniper-nsp [juniper-nsp-bounces at puck.nether.net] On Behalf Of
> sameer mughal [pcs.sameer1 at gmail.com]
> Sent: Monday, January 29, 2018 8:20 PM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] SRX 550 BGP Flapping
>
> I have seen hold time error. what will be the fix on this issue?
>
> show bgp neighbor xx.xx.xx.xx
> Peer: xx.xx.xx.xx+179 AS xxxx Local: xx.xx.xx.xx+56228 AS xxxx
> Type: External State: Established Flags: <Sync>
> Last State: OpenConfirm Last Event: RecvKeepAlive
> Last Error: Hold Timer Expired Error
> Export: [ IMPORT-LAN-INTO-BGP ] Import: [ Reject-BGP ]
> Options: <Preference LocalAddress AuthKey PeerAS Refresh>
> Options: <AdvertisePeerAs>
> Authentication key is configured
> Local Address: xx.xx.xx.xx Holdtime: 90 Preference: 170
> Number of flaps: 30
> Last flap event: HoldTime
> Error: 'Hold Timer Expired Error' Sent: 30 Recv: 0
> Peer ID: xx.xx.xx.xx Local ID: xx.xx.xx.xx Active Holdtime: 90
> Keepalive Interval: 30 Group index: 0 Peer index: 0
> BFD: disabled, down
> Local Interface: reth2.0
> NLRI for restart configured on peer: inet-unicast
> NLRI advertised by peer: inet-unicast
> NLRI for this session: inet-unicast
> Peer supports Refresh capability (2)
> Stale routes from peer are kept for: 300
> Peer does not support Restarter functionality
> Peer does not support Receiver functionality
> Peer does not support LLGR Restarter or Receiver functionality
> Peer supports 4 byte AS extension (peer-as xx.xx.xx.xx)
> Peer does not support Addpath
> Table inet.0 Bit: 10000
> RIB State: BGP restart is complete
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> On Tue, Jan 30, 2018 at 9:14 AM, sameer mughal <pcs.sameer1 at gmail.com>
> wrote:
>
> > Hi,
> > Can anyone help me on this bgp flapping issue?
> >
> > show bgp summary
> > Groups: 1 Peers: 1 Down peers: 0
> > Table Tot Paths Act Paths Suppressed History Damp State
> > Pending
> > inet.0
> > 37 31 0 0 0
> > 0
> > Peer AS InPkt OutPkt OutQ Flaps Last
> > Up/Dwn State|#Active/Received/Accepted/Damped...
> > xx.xx.xx.xx 9541 86 70 0 *30 *
> > 28:28 31/37/36/0 0/0/0/0
> >
> > {primary:node0}
> >
> > Peer: xx.xx.xx.xx +179 AS 9541 Local: xx.xx.xx.xx +56228 AS 64520
> > Type: External State: Established Flags: <Sync>
> > Last State: OpenConfirm Last Event: RecvKeepAlive
> > Last Error: Hold Timer Expired Error
> > Export: [ IMPORT-LAN-INTO-BGP ] Import: [ Reject-BGP ]
> > Options: <Preference LocalAddress AuthKey PeerAS Refresh>
> > Options: <AdvertisePeerAs>
> > Authentication key is configured
> > Local Address: 192.168.111.74 Holdtime: 90 Preference: 170
> > Number of flaps: 30
> > Last flap event: HoldTime
> > Error: 'Hold Timer Expired Error' Sent: 30 Recv: 0
> > Peer ID: xx.xx.xx.xx Local ID: xx.xx.xx.xx Active Holdtime: 90
> > Keepalive Interval: 30 Group index: 0 Peer index: 0
> > BFD: disabled, down
> > Local Interface: reth2.0
> > NLRI for restart configured on peer: inet-unicast
> > NLRI advertised by peer: inet-unicast
> > NLRI for this session: inet-unicast
> > Peer supports Refresh capability (2)
> > Stale routes from peer are kept for: 300
> > Peer does not support Restarter functionality
> > Peer does not support Receiver functionality
> > Peer does not support LLGR Restarter or Receiver functionality
> > Peer supports 4 byte AS extension (peer-as 9541)
> > Peer does not support Addpath
> > Table inet.0 Bit: 10000
> > RIB State: BGP restart is complete
> > Send state: in sync
> > Active prefixes: 31
> > Received prefixes: 37
> > Accepted prefixes: 36
> > Suppressed due to damping: 0
> > Advertised prefixes: 48
> > Last traffic (seconds): Received 28 Sent 10 Checked 58
> > Input messages: Total 80 Updates 30 Refreshes 0 Octets
> 2749
> > Output messages: Total 64 Updates 5 Refreshes 0 Octets
> 1618
> > Output Queue[0]: 0 (inet.0, inet-unicast)
> >
> >
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
> Virus-free.
> > www.avast.com
> > <https://www.avast.com/sig-email?utm_medium=email&utm_
> source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link>
> > <#m_-4192711485207260329_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list