[j-nsp] Logical Systems with VPLS using only lt interfaces

craig washington craigwashington01 at hotmail.com
Tue Jun 12 15:30:46 EDT 2018


All,


I am setting up some logical systems on an MX480.

The question I have is, has anyone run across an issue when trying to get sites to communicate using VPLS b/c of duplicate mac-address?

Pings of course don't work but the control plane looks good but I am concerned about the mac.

You can see from the snapshot below I am learning the same mac off of the "local" interface on CPE50 and CPE60


///////////////////////////////////////


**
show vpls mac-table logical-system PE1

MAC flags       (S -static MAC, D -dynamic MAC, L -locally learned, C -Control MAC
    O -OVSDB MAC, SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC)

Logical system   : PE1
Routing instance : SPRINT
 Bridging domain : __SPRINT__, VLAN : NA
   MAC                 MAC      Logical          NH     RTR
   addresssss          flags    interface        Index  ID
   ca:e7:f0:58:74:30   S,NM     lt-3/1/10.1051

**
show vpls mac-table logical-system PE2

MAC flags       (S -static MAC, D -dynamic MAC, L -locally learned, C -Control MAC
    O -OVSDB MAC, SE -Statistics enabled, NM -Non configured MAC, R -Remote PE MAC)

Logical system   : PE2
Routing instance : SPRINT
 Bridging domain : __SPRINT__, VLAN : NA
   MAC                 MAC      Logical          NH     RTR
   addresssss          flags    interface        Index  ID
   ca:e7:f0:58:74:30   S,NM     lt-3/1/10.1061


**
PE2> show route forwarding-table family vpls
Logical system: PE2
Routing table: SPRINT.vpls
VPLS:
Destination        Type RtRef Next hop           Type Index    NhRef Netif
default            perm     0                    dscd     1969     1
lsi.118489088      intf     0                    indr  1048579     4
                              10.10.80.1        Push 262157, Push 299968(top)     1885     2 lt-3/1/10.25
0x30005/51         user     0                    comp     1948     2
ca:e7:f0:58:74:30/48 user     0                  ucst     1974     3 lt-3/1/10.1061
lt-3/1/10.1061     intf     0                    ucst     1974     3 lt-3/1/10.1061
0x30003/51         user     0                    comp     1883     2
0x30004/51         user     0                    comp     1882     2

**
PE1> show route forwarding-table family vpls
Logical system: PE1
Routing table: SPRINT.vpls
VPLS:
Destination        Type RtRef Next hop           Type Index    NhRef Netif
default            perm     0                    dscd     1965     1
lsi.152043520      intf     0                    indr  1048582     4
                              10.10.70.1        Push 262155, Push 300080(top)     1888     2 lt-3/1/10.24
0x30006/51         user     0                    comp     1950     2
ca:e7:f0:58:74:30/48 user     0                  ucst     1952     3 lt-3/1/10.1051
lt-3/1/10.1051     intf     0                    ucst     1952     3 lt-3/1/10.1051
0x30001/51         user     0                    comp     1880     2
0x30002/51         user     0                    comp     1828     2


**
show vpls connections summary logical-system PE2
Layer-2 VPN Connections Summary:

Instance: SPRINT
Edge protection: Not-Primary
  Local site: site60 (61)
    Total VCs up: 1, Total VCs down: 0




///////////////////////////////////////

Hope this is enough and isn't too convoluted.
Thanks for any assistance.



More information about the juniper-nsp mailing list