nitzan.tzelniker at gmail.com
Mon Jun 18 02:47:05 EDT 2018
AFAIK from few JTAC cases both 16.1R7 and 17.3R3 should be out in the end
of this month or sometime next month
but as always it could be changed
On Mon, Jun 18, 2018 at 9:36 AM Sebastian Becker <sb at lab.dtag.de> wrote:
> The ETA for GA was 31-MAY-2018. So hopefully only a matter of days.
> Sebastian Becker
> > Am 17.06.2018 um 23:11 schrieb craig washington <
> craigwashington01 at hotmail.com>:
> > It's not released yet as far as I know.
> > I know it was supposed to be at least per our SE at Juniper.
> > Hopefully will have some sort of update this week unless anyone else
> knows something.
> > From: juniper-nsp <juniper-nsp-bounces at puck.nether.net <mailto:
> juniper-nsp-bounces at puck.nether.net>> on behalf of Vincent Bernat <
> bernat at luffy.cx <mailto:bernat at luffy.cx>>
> > Sent: Sunday, June 17, 2018 10:17 AM
> > To: Sebastian Becker
> > Cc: juniper-nsp at puck.nether.net <mailto:juniper-nsp at puck.nether.net>
> > Subject: Re: [j-nsp] MX480
> > ❦ 17 juin 2018 12:05 +0200, Sebastian Becker <sb at lab.dtag.de <mailto:
> sb at lab.dtag.de>> :
> > > 16.1R7 is a golden release.
> > Is it already released? Not listed here:
> > https://www.juniper.net/support/downloads/?p=mx480#sw <
> > Download Software - Support - Juniper Networks <
> > www.juniper.net <http://www.juniper.net/>
> > Juniper Software Downloads. It is important to keep your products
> registered and your install base updated.
> > Is 16.1R6-S4 considered almost equivalent?
> > --
> > The fashion wears out more apparel than the man.
> > -- William Shakespeare, "Much Ado About Nothing"
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net <mailto:
> juniper-nsp at puck.nether.net>
> > https://puck.nether.net/mailman/listinfo/juniper-nsp <
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp