jackson.tim at gmail.com
Tue May 15 12:59:25 EDT 2018
I think you're in the ~200gbps range for them if VXLAN is considered tunnel
services. If not it should be line rate.
ARP scale on 204 is rather large, even when terminating over a VTEP.
That's my exact use case for the MX 204 tbh.
On Tue, May 15, 2018, 11:49 AM Luca Salvatore via juniper-nsp <
juniper-nsp at puck.nether.net> wrote:
> How is the MX204 for VXLAN routing (routing between VXLANs)
> Can i expect close to line rate performance for that?
> Curious how it would stack up against triednt2+ based switches fo VXLAN
> On Mon, May 14, 2018 at 8:44 PM Mark Tinka <mark.tinka at seacom.mu> wrote:
> > On 15/May/18 02:24, Aaron Gould wrote:
> > > Does it have lots of MPLS service capability?
> > It's the same Trio chip you find in modern MPC's. So I expect so.
> > Testing some shortly.
> > Mark.
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp