[j-nsp] Ex8208 TRAP

Rob Foehl rwf at loonybin.net
Mon May 21 12:09:44 EDT 2018


On Mon, 21 May 2018, Chris Kawchuk wrote:

> Your dates are all over the place....
>
> May 19, then Jun 14, then back to May 19th...

That's what happens when a card boots, before it figures out the current 
time...  Why the RE accepts logs like this at face value is another 
question, but this behavior is not uncommon.

> Your SFP lost optics. Low power.

To be expected when the card resets, as indicated by the first log entry:

>> May 19 20:42:52  Core-SW-8208 chassisd[1338]: CHASSISD_SNMP_TRAP10: SNMP trap generated: FRU power on (jnxFruContentsIndex 8, jnxFruL1Index 1, jnxFruL2Index 1, jnxFruL3Index 0, jnxFruName PIC: 8x 10GE SFP+ @ 0/0/*, jnxFruType 11, jnxFruSlot 0, jnxFruOfflineReason 2, jnxFruLastPowerOff 20675705, jnxFruLastPowerOn 20686688)

> So.. what have you done to troubleshoot this w/your optical carrier or fibre provider, besides post on j-nsp?

OP needs to figure out why the card reset, which their optical carrier or 
fibre provider probably can't tell them.  Earlier logs might help.

-Rob


More information about the juniper-nsp mailing list