[j-nsp] SRX 300 VPN

[Roger Wiklund]

https://www.juniper.net/documentation/en_US/junos/topics/concept/ssl-vpn-ncp-remote-access-client.html

NCP Exclusive Remote Access Client runs in either of the two following
modes:

NCP Exclusive Remote Access Client v1, which supports IPsec messages
encapsulated within a TCP connection over port 443
NCP Exclusive Remote Access Client v2, which supports IPsec messages with
an SSL/TLS connection (NCP v2 uses TLSv1.0.)



On Fri, May 25, 2018 at 9:10 PM, Ola Thoresen <ola at nytt.no> wrote:

> On 25. mai 2018 20:37, Roger Wiklund wrote:
>
> Juniper sold Junos Pulse and that became Pulse Secure.
>>
>> The SRX300 supports SSL VPN but requires the third party NCP client (not
>> free).
>>
>
> Well.. That "SSL-VPN" is not really SSL-VPN.  It is simply dynamic IPSec
> over tcp port 443, wrapped in a GUI on the client side...
>
>
> Rgds.
>
> Ola (T)
>
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>