[j-nsp] Problem with QinQ MPLS Service + Switch

[Aaron1]

Yeah I’m not sure about how to do QinQ

https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/vlan-double-tagging-with-l3-interface.html

Aaron

> On Oct 6, 2018, at 1:37 PM, Robert Hass <robhass at gmail.com> wrote:
> 
> l2circuit configuration on r03 is fine. I just made mistake putting post on j-nsp.
> Why should I push and pop on R03 ? See that QinQ (so adding second dot1q tag) is done on catalyst switch.
> 
>> On Sat, Oct 6, 2018 at 3:07 PM Aaron1 <aaron1 at gvtc.com> wrote:
>> And if that doesn’t work, you might need to push and pop on the R03 side...
>> 
>> ...also, is customer sending you 300 tagged frames on r01?  If not then I don’t think you should tag and push and pop there on r01 Uni port 
>> 
>> Aaron
>> 
>> > On Oct 6, 2018, at 8:03 AM, Aaron1 <aaron1 at gvtc.com> wrote:
>> > 
>> > At least fix this on r03...
>> > 
>> > interface xe-0/0/0.300
>> > Should be ...
>> > interface xe-0/0/1.300
>> > 
>> > Aaron
>> > 
>> >> On Oct 6, 2018, at 2:19 AM, Robert Hass <robhass at gmail.com> wrote:
>> >> 
>> >> interface xe-0/0/0.300
>> > _______________________________________________
>> > juniper-nsp mailing list juniper-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>>