[j-nsp] MX204 Invalid port profile configuration

[Raphael Maunier]

You may want to check your configuration here (

https://apps.juniper.net/home/port-checker/


On 09/10/2018 12:28, "juniper-nsp on behalf of Łukasz Trąbiński" <juniper-nsp-bounces at puck.nether.net on behalf of lukasz at trabinski.net> wrote:

    Hello
    
    I’m trying to setup  3 100G ports on MX204 according this document:
    
    https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/chassis-mx204-rate-select-configuring.html
    
    router> show configration chassis
    fpc 0 {
    	pic 0 {
    	pic-mode 100G;
    	number-of-ports 3;
    	}
    	pic 1 {
    	pic-mode 10G;
    	number-of-ports 8;
    	}
    }
    
    I have also set something like this:
    
    [edit chassis fpc 0 pic 0]
    user at host# show 
    port 0 {
        speed 100g;
    }
    port 1 {
        speed 100g;
    }
    port 2 {
        speed 100g;
    }
    port 3 {
        speed 10g;
    }
    
    
    But, I still have alarms (show chassis alarm)
    Minor	FPC 0	PIC 1	Invalid port profile configuration
    
    How to setup 100G ports on fpc0? 
    
    Any idea?
    
    
    
    
    
    
    _______________________________________________
    juniper-nsp mailing list juniper-nsp at puck.nether.net
    https://puck.nether.net/mailman/listinfo/juniper-nsp