[j-nsp] MX204 Invalid port profile configuration

Jackson, William william.jackson at gibtele.com
Tue Oct 9 07:40:49 EDT 2018


And then you need to reboot the PIC!

At least on the MX10003 you do.

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Jason Lixfeld
Sent: 09 October 2018 13:11
To: Łukasz Trąbiński <lukasz at trabinski.net>
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] MX204 Invalid port profile configuration

Hi,

https://www.juniper.net/documentation/en_US/junos/topics/concept/rate-selectability-overview.html

I ran into this too, and my interpretation of the above on why it didn’t work is that if you set rate selectability in PIC mode, all ports on the PIC are set to the same speed, so you’ve assigned all 400G of available bandwidth to PIC0.  Even though you’ve set number-of-ports to 3 on PIC0, it doesn’t have the intended effect.

The way to do it it seems is to set rate selectability per port:

pic 0 {
    port 0 {
        speed 100g;
    }
    port 1 {
        speed 100g;
    }
    port 2 {
        speed 100g;
    }
}
pic 1 {
    port 0 {
        speed 10g;
    }
    port 1 {
        speed 10g;
    }
    port 2 {
        speed 10g;
    }
    port 3 {
        speed 10g;
    }
    port 4 {
        speed 10g;
    }
    port 5 {
        speed 10g;
    }
    port 6 {
        speed 10g;
    }
    port 7 {
        speed 10g;
    }
}

> On Oct 9, 2018, at 6:27 AM, Łukasz Trąbiński <lukasz at trabinski.net> wrote:
> 
> Hello
> 
> I’m trying to setup  3 100G ports on MX204 according this document:
> 
> https://www.juniper.net/documentation/en_US/junos/topics/task/configur
> ation/chassis-mx204-rate-select-configuring.html
> 
> router> show configration chassis
> fpc 0 {
> 	pic 0 {
> 	pic-mode 100G;
> 	number-of-ports 3;
> 	}
> 	pic 1 {
> 	pic-mode 10G;
> 	number-of-ports 8;
> 	}
> }
> 
> I have also set something like this:
> 
> [edit chassis fpc 0 pic 0]
> user at host# show
> port 0 {
>    speed 100g;
> }
> port 1 {
>    speed 100g;
> }
> port 2 {
>    speed 100g;
> }
> port 3 {
>    speed 10g;
> }
> 
> 
> But, I still have alarms (show chassis alarm)
> Minor	FPC 0	PIC 1	Invalid port profile configuration
> 
> How to setup 100G ports on fpc0? 
> 
> Any idea?
> 
> 
> 
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp


More information about the juniper-nsp mailing list