[j-nsp] vMX vFPC CPU utilization

[Paul Abbott]

CPU utilization on DPDK Applications (like vMX) is not a good way of representing utilization.  vMX uses Poll mode drivers which consume all of the CPU cycles on a given thread whether there is 1 packet or 4 million.
If you are looking to link utilization, packet or bps I/O is better.

Thanks,

Paul Abbott
Technical Marketing Engineering - RPT
 

On 9/11/18, 3:15 PM, "juniper-nsp on behalf of Robert Hass" <juniper-nsp-bounces at puck.nether.net on behalf of robhass at gmail.com> wrote:

    Hi
    Is any way to (i.e. CLI command) to display CPU cores utilization for vMX ?
    I just know 'show pfe statistics traffic bandwidth" - but it's display
    amount of traffic vs installed vMX license.
    
    Rob
    _______________________________________________
    juniper-nsp mailing list juniper-nsp at puck.nether.net
    https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_juniper-2Dnsp&d=DwICAg&c=HAkYuh63rsuhr6Scbfh0UjBXeMK-ndb3voDTXcWzoCI&r=DAJeuMbBqqzCDxZaZYnLbJdeeXyAv0E0m4dhjIri8oI&m=xadTY1vizmAZDiuctprVny3T96SkRFox0l8kviHQy44&s=2NINWaDja-NziLLPSBCuJt7yu0kQelmVw6_RpRbgv0w&e=