[j-nsp] ether-options vs gigether-options in MX series

[Olivier Benghozi]

ether-options -> gigether-options

> Le 18 sept. 2018 à 17:47, Drew Weaver <drew.weaver at thenap.com> a écrit :
> 
> Greetings,
> 
> I am attempting to create a link aggregation on an MX80.
> 
> Reading the documentation it indicates:
> 
> ether-options {
>        802.3ad ae0;
>    }
> 
> To an interface will add that physical link to an aggregation.
> 
> However, when I use that and look at the configuration it says:
> 
> ether-options {
>    ##
>    ## Warning: This feature can be configured only in Ethernet LAN services mode
>    ## Warning: This feature can be configured only in Ethernet LAN services mode
>    ## Warning: This feature can be configured only in Ethernet LAN services mode
>    ## Warning: This feature can be configured only in Ethernet LAN services mode
>    ## Warning: This feature can be configured only in Ethernet LAN services mode
>    ##
>    802.3ad ae0;
> }
> If I use gigether-options it accepts it.
> 
> What is the correct way of doing this on an MX80 running v 15?
>