[j-nsp] Strange chassisd Log on MX204 with 17.4R2 / PEM power status has changed, run power budget again

[Melchior Aelmans]

I would open a JTAC case

On Tue, Sep 18, 2018 at 10:48 AM, Joerg Staedele <js at tnib.de> wrote:

> Hi,
>
> i am seeing a lot of these messages in the chassisd log:
>
> Sep 18 10:44:25  PEM power status has changed, run power budget again
> Sep 18 10:44:28  PEM power status has changed, run power budget again
> Sep 18 10:44:44  PEM power status has changed, run power budget again
> Sep 18 10:44:47  PEM power status has changed, run power budget again
> Sep 18 10:45:22  PEM power status has changed, run power budget again
> Sep 18 10:45:28  PEM power status has changed, run power budget again
>
> I already updated from 17.4R1 to R2 but it's still there. There is no
> alarm active and both PS look normal but the voltage on PEM 0 is "only"
> 11V, maybe there's a problem?
>
> PEM 0 status:
>   State                      Online
>   Airflow                    Front to Back
>   Temperature                OK   48 degrees C / 118 degrees F
>   Temperature                OK   49 degrees C / 120 degrees F
>   Fan Sensor                 6660 RPM
>   DC Output           Voltage(V) Current(A)  Power(W)  Load(%)
>                         11.00       7             77       11
> PEM 1 status:
>   State                      Online
>   Airflow                    Front to Back
>   Temperature                OK   47 degrees C / 116 degrees F
>   Temperature                OK   49 degrees C / 120 degrees F
>   Fan Sensor                 6570 RPM
>   DC Output           Voltage(V) Current(A)  Power(W)  Load(%)
>                         12.00       8             96       14
>
> Anyone else having this problem?
>
> Kind regards.
>
>  Joerg
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>