[j-nsp] MACsec interoperability between MX10003 and Cisco ASR 9k?

[Christian Seitz]

Hello,

I'm currently trying to find out if somebody has already tested if MACsec can
be used on a 100G port between MX10003 and Cisco ASR 9k (required licenses
will be installed on both routers). Yes, MACsec is a standard, but... ;-)

Unfortunately Juniper currently has no MX10003 available in the loaner pool.
They have an MX10003 in their lab in Amsterdam, but no ASR 9k. Therefore I
cannot test is by myself and hope somebody else already made some experience.

Thanks in advance and regards,

Chris