[j-nsp] RFC2544 on Juniper SRX300

[Emille Blanc]

Page 6 of the SRX300 series datasheet states in the fineprint;
16* "Throughput numbers based on UDP packets and RFC2544 test methodology."

That said, I don't see RFC2544 generation and reflection explicitly stated anywhere, nor do I see the config syntax supported up to 15.1X49-D160.2

Juniper KB shows ACX and MX as supported platforms, so perhaps you could create a loopback on the SRX, or do your tests between routing-instances on the MX.

-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Matthew Crocker
Sent: Wednesday, April 17, 2019 7:05 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] RFC2544 on Juniper SRX300


Hello,

I have a customer WAN with 20ish SRX300s & 1 MX80 connected and need to setup RFC2544 to prove out the WAN circuits.

Is RFC2544 supports on the SRX in later JunOS versions?

I don’t want to go through the process of upgrading the OS and not get access to the feature.

Current versions running.


Model: srx300

Junos: 15.1X49-D140.2

JUNOS Software Release [15.1X49-D140.2]


Model: mx80

Junos: 15.1R6.7


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp