[j-nsp] RFC2544 on Juniper SRX300

[Matthew Crocker]

I thought that was the case, I couldn't find it either,  thanks for the validation.

I'll just spin up some iperf3 instances and beat on the network that way.

-Matt


On 4/17/19, 11:58 AM, "Emille Blanc" <emille at abccommunications.com> wrote:

    Page 6 of the SRX300 series datasheet states in the fineprint;
    16* "Throughput numbers based on UDP packets and RFC2544 test methodology."
    
    That said, I don't see RFC2544 generation and reflection explicitly stated anywhere, nor do I see the config syntax supported up to 15.1X49-D160.2
    
    Juniper KB shows ACX and MX as supported platforms, so perhaps you could create a loopback on the SRX, or do your tests between routing-instances on the MX.
    
    -----Original Message-----
    From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Matthew Crocker
    Sent: Wednesday, April 17, 2019 7:05 AM
    To: juniper-nsp at puck.nether.net
    Subject: [j-nsp] RFC2544 on Juniper SRX300
    
    
    Hello,
    
    I have a customer WAN with 20ish SRX300s & 1 MX80 connected and need to setup RFC2544 to prove out the WAN circuits.
    
    Is RFC2544 supports on the SRX in later JunOS versions?
    
    I don’t want to go through the process of upgrading the OS and not get access to the feature.
    
    Current versions running.
    
    
    Model: srx300
    
    Junos: 15.1X49-D140.2
    
    JUNOS Software Release [15.1X49-D140.2]
    
    
    Model: mx80
    
    Junos: 15.1R6.7
    
    
    _______________________________________________
    juniper-nsp mailing list juniper-nsp at puck.nether.net
    https://puck.nether.net/mailman/listinfo/juniper-nsp