[j-nsp] EVPN all-active toward large layer 2?

[adamv0025 at netconsultings.com]

> Tarko Tikan
> Sent: Thursday, April 18, 2019 10:14 AM
> 
> hey,
> 
> > You have effectively created L2 loop over EVPN, so to cut it you need
> > a link between bridged network and EVPN to be a single link. There is
> > no STP in EVPN.
> 
> To be fair it's not a full loop but only BUM traffic will loop back to
other PE.
> 
Yes but there should be an MPLS label associated with that traffic that says
to the other PE -do not send this traffic back to LAN -cause it's the same
site. 

adam