[j-nsp] MX10003 rack size

[Pete Webb]

No mate,
I made the same mistake.
Minimum you can get away with is 1000 deep racks, and even then you have to leave the front air filter off.

Pete

-----Original Message-----
From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> On Behalf Of Sander Steffann
Sent: 30 July 2019 13:32
To: nanog <nanog at nanog.org>; Juniper List <juniper-nsp at puck.nether.net>
Subject: [j-nsp] MX10003 rack size

Hi,

Has anyone ever managed to fit a Juniper MX10003 in a 90cm deep rack? Without applying power tools to either the rack or the router ;)

Cheers,
Sander




Pete Webb
Network Architect

Direct:+44 (0)203 697 5173
Mob:+44 (0)7860 271 153






Any prices quoted in this email are for indicative purposes only and are subject to further technical appraisal. Additional installation charges may apply and all orders are subject to survey. Unless otherwise specified, prices are in GB Pounds and exclude VAT (or equivalent taxes). Acceptance of any proposal contained in this email is subject to formal contract. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Virtual1.

Virtual1 is registered in England and Wales with company number 6177891. Our registered address is: 6th Floor Alphabeta, 14-18 Finsbury Square, London EC2A 1BR

This communication may contain confidential information.  It may also be the subject of legal professional privilege and/or under copyright. If you are not an intended recipient, you must not keep, forward, copy, use, save or rely on this communication, and any such action is unauthorised and prohibited. If you have received this communication in error, please reply to this e-mail to notify the sender of its incorrect delivery, and then delete both it and your reply.