[j-nsp] MX10 Pseduwire

[adamv0025 at netconsultings.com]

> Mohammad Khalil
> Sent: Thursday, August 29, 2019 7:55 PM
> 
> Greetings all.
> 
> Am trying to find how many pseduwires are supported on MX10 with no luck.
> Any ideas?
> 
Any vendor scaling numbers are the result of unidimensional testing if not
stated otherwise -so X number of PWs but there's nothing else configured on
that box, so it's always best to do scaling testing.
Assuming your network is not big (not hundreds of PEs) then you'll be fine,
see the most resource consuming part of PWs are the TCP sessions (tLDP
-which can be alleviated by using BGP for discovery and label signalling as
Saku alluded to in his response). 
That said if PWs are not going to setup be among a large number of PEs, or
you'll use BGP, then the label exchange action is going to happen over a few
TCP sessions anyways.
So your only limit is the elusive number of labels (sure there are other PFE
hidden variables -but I'm pretty sure you're not going to hit those with the
size of your setup). 

adam