[j-nsp] multi services cards - MX

[Aaron Gould]

Circling back on some older threads... I'm doing this because I've been
growing my cgnat environments and needing to remind myself of somethings,
etc...

Regarding MS-MPC-128G being used for napt-44 (nat overload ipv4 savings)
what do you all know about throughput ?

I understand that it may not be an exact number... but is there a general
nat/napt-44 throughput number associated with the ms-mpc-128g ?

I've seen numbers ranging from ~7.5 gbps per npu so ~30 gbps total (x4 with
4 npu's per ms-mpc) ... to other numbers like 150 or 160 gbps in a certain
slide/document speaking of scp chipset sx or fx... 

...i may have misread somethings, but let me know what y'all know about the
capabilities of the ms-mpc-128g inside an MX960 as it pertains to napt-44

-Aaron



-----Original Message-----
From: juniper-nsp [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
harbor235
Sent: Saturday, March 18, 2017 12:24 PM
To: Juniper List
Subject: [j-nsp] multi services cards - MX

My google-fu is preventing me from finding performance data on the various
MS-MPC linecards for the MX router series. I am looking for IPSEC
capabilities e.g. max tunnels, max bandwidth per tunnel, etc ... Different
versions of the ms-mpc support different performance and tunnel sizes?

Can anyone point me to a good reference url?


Mike
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp