[j-nsp] QFX5100 red alarm after power-off

[Giovanni Bellac]

Hi all,
short update:We experiencing the red alarm only when the management port is connected when powering off the QFX5100-48T - weird...When the management port is not connected when powering down the device, there is no red alarm.
Kind regardsOguzhan
    Am Mittwoch, 13. Februar 2019, 12:08:39 MEZ hat Giovanni Bellac via juniper-nsp <juniper-nsp at puck.nether.net> Folgendes geschrieben:  
 
 Hi all,

after powering off a QFX5100-48T (request system power-off) the fans are spinning down and the ALARM LED is lightning red. The switch is working and looking as expected without any error messages.

Is this a normal behavior ? Has someone a spare unit for a short test ?

Thanks and kind regards
Giovanni
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp