[j-nsp] QFX5100 red alarm after power-off

[Alain Hebert]

     Then you should open a ticket with the JTAC.

-----
Alain Hebert                                ahebert at pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770     Beaconsfield, Quebec     H9W 6G7
Tel: 514-990-5911  http://www.pubnix.net    Fax: 514-990-9443

On 2/14/19 11:57 AM, Giovanni Bellac via juniper-nsp wrote:
>   
> Hi,
> it matters for us, because I want to know the root cause of the red alarm LED when powering it down with an enabled management port.
> Kind regards
>      Am Donnerstag, 14. Februar 2019, 13:12:13 MEZ hat Anderson, Charles R <cra at wpi.edu> Folgendes geschrieben:
>   
>   Why does it matter since the switch is halted/powered off anyway?
>
> On Thu, Feb 14, 2019 at 08:31:43AM +0000, Giovanni Bellac via juniper-nsp wrote:
>>    Hi,
>> we are issuing the command (request system power-off) when the switch is booted up normally. We are experiencing this on different JunOS versions (14.1, 17.3, 18.1).
>>  From our last email:
>> Short update:We experiencing the red alarm only when the management port is connected when powering off the QFX5100-48T - weird...When the management port is not connected when powering down the device, there is no red alarm.
>> Kind regards
>>
>>
>>      Am Mittwoch, 13. Februar 2019, 16:22:59 MEZ hat Anderson, Charles R <cra at wpi.edu> Folgendes geschrieben:
>>    
>>    On Wed, Feb 13, 2019 at 11:08:16AM +0000, Giovanni Bellac via juniper-nsp wrote:
>>> after powering off a QFX5100-48T (request system power-off) the fans are spinning down and the ALARM LED is lightning red. The switch is working and looking as expected without any error messages.
>>>
>>> Is this a normal behavior ? Has someone a spare unit for a short test ?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp