[j-nsp] EX4200 virtual chassis and PoE

Victor Sudakov vas at mpeks.tomsk.su
Wed Feb 20 07:13:43 EST 2019


Dear Colleagues,

Do I need to know anything special to configure PoE in a virtual chassis
environment? For some reason PoE devices on ports ge-1/0/2 and ge-1/0/3 do
not get power while the same device in port ge-0/0/2 does. All details
below.

Virtual Chassis ID: XXXXXXXXXXXXX
Virtual Chassis Mode: Enabled
                                           Mstr           Mixed Neighbor List
Member ID  Status   Serial No    Model     prio  Role      Mode ID  Interface
0 (FPC 0)  Prsnt    BM0213317717 ex4200-24t 200  Master*      N  1  vcp-1
1 (FPC 1)  Prsnt    BM0214400293 ex4200-24t 128  Backup       N  0  vcp-1

Member ID for next new member: 2 (FPC 2)

> show poe controller
Controller  Maximum   Power         Guard    Management   Status        Lldp
index       power     consumption   band                                Priority
   0        130.00W   3.13W           0W     Class        AF_ENHANCE    Disabled
   1        130.00W   0.00W           0W     Class        AF_ENHANCE    Disabled


> show poe interface
Interface    Admin       Oper    Max        Priority       Power          Class
             status      status  power                     consumption
 ge-0/0/0    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-0/0/1    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-0/0/2    Enabled      ON     15.4W      Low            2.9W            0
 ge-0/0/3    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-0/0/4    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-0/0/5    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-0/0/6    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-0/0/7    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-1/0/0    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-1/0/1    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-1/0/2    Enabled     OFF     15.4W      Low            0.0W           not-applicable
 ge-1/0/3    Enabled     OFF     15.4W      Low            0.0W           not-applicable
 ge-1/0/4    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-1/0/5    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-1/0/6    Disabled    Disabled 0.0W      Low            0.0W           not-applicable
 ge-1/0/7    Disabled    Disabled 0.0W      Low            0.0W           not-applicable

> show configuration poe
interface all {
    disable;
}
interface ge-0/0/2;
interface ge-1/0/2;
interface ge-1/0/3;

{master:0}



-- 
Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
2:5005/49 at fidonet http://vas.tomsk.ru/


More information about the juniper-nsp mailing list