[j-nsp] MX204 Tunnel Services

[Timur Maryin]

Perhaps encapsulation vlan instead may help.


On 27-Dec-18 23:40, Fraser McGlinn wrote:
> Further to this, and to clarify I do already have tunnel-services enabled and after configuring I get output packets on each unit, but no input packets. It seems like the PFE is just eating the packets.


> fraser@> show configuration | display set | match lt-0/0/0
> set interfaces lt-0/0/0 unit 100 encapsulation ethernet
> set interfaces lt-0/0/0 unit 100 peer-unit 101
> set interfaces lt-0/0/0 unit 100 family inet address 100.64.0.1/30
> set interfaces lt-0/0/0 unit 101 encapsulation ethernet
> set interfaces lt-0/0/0 unit 101 peer-unit 100
> set interfaces lt-0/0/0 unit 101 family inet address 100.64.0.2/30
> set routing-instances TEST interface lt-0/0/0.101