[j-nsp] inline-jflow monitoring

[A. Camci]

 This sets a sampling rate of 128:1. Is that intentional?
yes.

i want samples of a every 128 packets

i have also tried with 100 and 512 but still same output.

Op wo 2 jan. 2019 om 11:16 schreef Dave Bell <me at geordish.org>:

> set forwarding-options sampling instance inline input rate 128
>
> This sets a sampling rate of 128:1. Is that intentional?
>
> Dave
>
> On Wed, 2 Jan 2019 at 10:08, A. Camci <avciguzeli at gmail.com> wrote:
>
>> Hi Steinar,
>>
>> see the config:
>>
>> set services flow-monitoring version-ipfix template ipv4 ipv4-template
>> set services flow-monitoring version-ipfix template ipv6 ipv6-template
>>
>>
>> set forwarding-options sampling instance inline input rate 128
>> set forwarding-options sampling instance inline family inet output
>> flow-server xx.xx.10.34 port 2055
>> set forwarding-options sampling instance inline family inet output
>> flow-server xx.xx.10.34 version-ipfix template ipv4
>> set forwarding-options sampling instance inline family inet output
>> inline-jflow source-address xx.xx.0.238
>>
>> set forwarding-options sampling instance inline family inet6 output
>> flow-server xx.xx.10.34 port 2055
>> set forwarding-options sampling instance inline family inet6 output
>> flow-server xx.xx.10.34 version-ipfix template ipv6
>> set forwarding-options sampling instance inline family inet6 output
>> inline-jflow source-address xx.xx.0.238
>>
>> set chassis fpc 0 sampling-instance inline
>> set forwarding-options sampling instance inline family inet output
>> flow-server xx.xx.10.34 version-ipfix template ipv4
>> set forwarding-options sampling instance inline family inet6 output
>> flow-server xx.xx.10.34 version-ipfix template ipv6
>> set protocols bgp group fulltable-2-genie neighbor xx.xx.10.34
>>
>> set interfaces ae0 unit 0 family inet sampling input
>> set interfaces ae0 unit 0 family inet6 sampling input
>> set interfaces ae1 unit 0 family inet sampling input
>> set interfaces ae1 unit 0 family inet6 sampling input
>> set interfaces ae5 unit 0 family inet sampling input
>> set interfaces ae5 unit 0 family inet6 sampling input
>>
>>
>> is a reboot necessary after the configuration ?
>>
>> thanks
>> ap
>>
>> Op wo 2 jan. 2019 om 10:56 schreef <sthaug at nethelp.no>:
>>
>> > > Does anyone have experience with GENIEATM ( 6.3.2 ) and Juniper MX480
>> > MPCE
>> > > Type 2 3D ( 16.1R4-S3.6).
>> > > recently we use the inline-jflow monitoring.
>> > >
>> > > it works but we receive too little sampling.
>> > > expect a 10k of sampling per second instead of 100 samples
>> >
>> > We have quite a bit of experience with inline-jflow/IPFIX. It mostly
>> > works just fine. Show your JunOS config, please.
>> >
>> > Steinar Haug, Nethelp consulting, sthaug at nethelp.no
>> >
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>