[j-nsp] inline-jflow monitoring

[Luis Balbinot]

>From 16.1R1 and up you should also configure the ip flow table sizes
as the default is 1024 entries for v4 if I'm not mistaken. Not sure if
this is your current issue but is something to consider as well. Also
check flex-flow-sizing as an option.

Luis

On Wed, Jan 2, 2019 at 7:51 AM A. Camci <avciguzeli at gmail.com> wrote:
>
> Hi all,
>
> Does anyone have experience with GENIEATM ( 6.3.2 ) and Juniper MX480 MPCE
> Type 2 3D ( 16.1R4-S3.6).
> recently we use the inline-jflow monitoring.
>
> it works but we receive too little sampling.
> expect a 10k of sampling per second instead of 100 samples
>
>
> Border Router:
> Flow information
>     FPC Slot: 0
>     Flow Packets: 39566361752, Flow Bytes: 34679308997163
>     Active Flows: 2478, Total Flows: 484673089
>     Flows Exported: 384265866, Flow Packets Exported: 131910524
>     Flows Inactive Timed Out: 103861379, Flows Active Timed Out: 380809232
>     Total Flow Insert Count: 103863857
>
>     IPv4 Flows:
>     IPv4 Flow Packets: 39206606168, IPv4 Flow Bytes: 34296101187914
>     IPv4 Active Flows: 2048, IPv4 Total Flows: 449829603
>     IPv4 Flows Exported: 365283923, IPv4 Flow Packets exported: 117813878
>     IPv4 Flows Inactive Timed Out: 87622231, IPv4 Flows Active Timed Out:
> 362205324
>     IPv4 Flow Insert Count: 87624279
>
>     IPv6 Flows:
>     IPv6 Flow Packets: 359755584, IPv6 Flow Bytes: 383207809249
>     IPv6 Active Flows: 430, IPv6 Total Flows: 34843486
>     IPv6 Flows Exported: 18981943, IPv6 Flow Packets Exported: 14096646
>     IPv6 Flows Inactive Timed Out: 16239148, IPv6 Flows Active Timed Out:
> 18603908
>     IPv6 Flow Insert Count: 16239578
>
>
> GENIEATM
> Received Flows/sec: 93
>
>
> thanks
> ap
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp