[j-nsp] Link establishment issues with 1Gbps SX/LX SFPs on QFX5110

[Eldon Koyle]

That is a fusion satellite device software version for an 18.x release.

-- 
Eldon


On Tue, Jul 2, 2019, 14:05 Colton Conor <colton.conor at gmail.com> wrote:

> Do you know when this will be fixed in the mainline releases? I have no
> clue what  3.5R1-S4.1 is?
>
> On Fri, Jun 28, 2019 at 2:22 PM Timothy Creswick <timothy at creswick.eu>
> wrote:
>
> > For anyone interested in this, JTAC released to us 3.5R1-S4.1 for the
> > satellite devices (I don't believe this will be generally available until
> > tomorrow). This addresses the issue and confirms that there were 2 or 3
> > different PRs relating to the Broadcom chipset being incorrectly
> programmed
> > by Junos.
> >
> > Some output, testing with a variety of 1Gbps optics (coded SX, LX,
> uncoded
> > BX, LX and SX).
> >
> > > show chassis hardware satellite
> > Hardware inventory:
> > Item             Version  Part number  Serial number     Description
> > FPC 100          REV 27   650-061152   WS37183----X      QFX5110-48S-4C
> >   PIC 0          REV 27   650-061152   WS37183----X      48x10G-4x100G
> >     Xcvr 0       850nm    740-011782   F----------X      SFP-SX
> >     Xcvr 2       1310nm   740-011783   F----------X      SFP-LX10
> >     Xcvr 4                NON-JNPR     VS51208----X
> > SFP-1000BASE-BX10-D
> >     Xcvr 6                NON-JNPR     VS60930----X      SFP-LX10
> >     Xcvr 8                NON-JNPR     VS50930----X      SFP-SX
> >
> > > show interfaces ge-100/0/[02468] terse
> > Interface               Admin Link Proto    Local                 Remote
> > ge-100/0/0              up    up
> > ge-100/0/2              up    up
> > ge-100/0/4              up    up
> > ge-100/0/6              up    up
> > ge-100/0/8              up    up
> >
> > > show configuration interfaces
> > ge-100/0/0 {
> >     unit 0;
> > }
> > ge-100/0/2 {
> >     unit 0;
> > }
> > ge-100/0/4 {
> >     unit 0;
> > }
> > ge-100/0/6 {
> >     unit 0;
> > }
> > ge-100/0/8 {
> >     unit 0;
> > }
> >
> > # bcmshell ps 1,3,5,7,9
> >
> > HW (unit 0)
> >                  ena/    speed/ link auto    STP                  lrn
> > inter   max  loop
> >            port  link    duplex scan neg?   state   pause  discrd ops
> >  face frame  back
> >        ge0(  1)  up      1G  FD   HW  Yes  Forward          None    F
> >  GMII  1518
> >        ge1(  3)  up      1G  FD   HW  Yes  Forward          None    F
> >  GMII  1518
> >        ge2(  5)  up      1G  FD   HW  Yes  Forward          None    F
> >  GMII  1518
> >        ge3(  7)  up      1G  FD   HW  Yes  Forward          None    F
> >  GMII  1518
> >        ge4(  9)  up      1G  FD   HW  Yes  Forward          None    F
> >  GMII  1518
> >
> > We note that now changing the auto-negotiate state in Junos correctly
> > updates the underlying chipset and link negotiation works correctly.
> > Interface is shown as GMII which we understand to be correct also.
> >
> > All-in, pretty terrible that - as far as we can tell - 1Gbps ports have
> > *never worked* on QFX5110 properly in all the four basic combinations
> (i.e.
> > SX and LX at both auto- and no-auto negotiation) until this release.
> Quite
> > how Juniper have been shipping the hardware for so long in that state is
> a
> > mystery to me.
> >
> >
> > Tim
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>