[j-nsp] Hyper Mode on MX

[Jackson, William]

Junos Fusion is not supported when hyper-mode is enabled.



-----Original Message-----
From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> On Behalf Of Franz Georg Köhler
Sent: 07 March 2019 12:46
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Hyper Mode on MX

On Thu, Mar 07, 2019 at 12:31:48PM +0100, Olivier Benghozi <olivier.benghozi at wifirst.fr> wrote:
> By the way HyperMode is only useful if you expect some very high 
> throughput with very small packets (none of the MPCs are linerate 
> using very small packets, but HyperMode brings it closer).

Thanks.
While we actually don't need that performance really I was wondering if would be a good idea to enable it on new installations preventively.

* Padding of Ethernet frames with VLAN.
Isn't that a very basic functionality and would break ethernet switching?

* Node Virtualization
This is Junos Node Slicing?



Best regards,

Franz Georg Köhler
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp