[j-nsp] MX204 in 2-post rack?

[Tim Jackson]

You can probably use some 4-post conversion kits to mount it in 2-post..
The mounts/rails on the MX204 are very similar to the other 1RU QFX mounts.
Either flush or center-mount:

https://www.racksolutions.com/2-post-conversion-brackets.html
https://www.racksolutions.com/4u-flushmount-conversion-kit.html

On Fri, Mar 15, 2019 at 2:51 PM Richard Hicks <richard.hicks at gmail.com>
wrote:

> Is anyone running the MX204 in a 2-post rack?
> How is it holding up?
>
> Spec sheet says it requires 4-post, which is a non-start in many of our
> locations.
>
> Thanks,
> Rick
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>