[j-nsp] JunOS on EX4550?

[adamv0025 at netconsultings.com]

Would anyone know how or if at all usable is netconf/yang  on 15 code on these EX4550 switches?

adam
> -----Original Message-----
> From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> On Behalf Of
> Aaron Gould
> Sent: Thursday, October 17, 2019 3:14 PM
> To: 'Richard McGovern' <rmcgovern at juniper.net>; 'Josh Baird'
> <joshbaird at gmail.com>
> Cc: 'Juniper List' <juniper-nsp at puck.nether.net>
> Subject: Re: [j-nsp] JunOS on EX4550?
> 
> On my EX4550, I recall going from 12 to 15 to get some mpls function.  But I
> also recall having issues with mpls services and then later removing those
> mpls services.
> 
> -Aaron
> 
> -----Original Message-----
> From: Richard McGovern [mailto:rmcgovern at juniper.net]
> Sent: Thursday, October 17, 2019 5:27 AM
> To: Josh Baird
> Cc: Juniper List
> Subject: Re: [j-nsp] JunOS on EX4550?
> 
> In my view best stability, used by most people (all of my customers are on
> 12.3 only), and no feature set differences. When 15.1 came out initially there
> were some concerns, so IMHO most just stayed on 12.3 once it was
> announced to have continued support.
> 
> Just my 2 cents worth.
> 
> Sent from my iPhone
> 
> On Oct 17, 2019, at 12:01 AM, Josh Baird <joshbaird at gmail.com> wrote:
> 
> 
> Thanks, Richard.  Any particular reason why I would be better off using
> 12.3R12?
> 
> On Wed, Oct 16, 2019 at 5:53 PM Richard McGovern
> <rmcgovern at juniper.net<mailto:rmcgovern at juniper.net>> wrote:
> No.  For legacy EX switches, for which EX4500/EX4550 fall into, 15.1 is last
> release.  At the same time, I think you might have best results using 12.3R12-
> S[latest] instead.  Both 12.3 and 15.1 will be maintained for life of legacy EX
> switches.
> 
> HTH, Rich
> 
> Richard McGovern
> Sr Sales Engineer, Juniper Networks
> 978-618-3342
> 
> I’d rather be lucky than good, as I know I am not good I don’t make the news,
> I just report it
> 
> 
> On 10/16/19, 1:50 PM, "Josh Baird"
> <joshbaird at gmail.com<mailto:joshbaird at gmail.com>> wrote:
> 
>     Is it possible (and recommended) to run anything newer than 15.1 on
> EX4550
>     (which is what the JTAC-recommended version currently is).
> 
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp