[j-nsp] ACX5448 & ACX710

[adamv0025 at netconsultings.com]

> Giuliano C. Medalha
> Sent: Tuesday, January 21, 2020 8:24 PM
> 
> Hello
> 
> We did some initial lab teste using 5448 for a client and we have checked with
> JUNIPER.
> 
> The major problems we found for our client environment:
> 
> - No support for FAT  (no roadmap);
> - No support for Entropy Label  (no roadmap);
> - No support for Output Policer or HQOS for VPLS / L2Circuit (no roadmap);
> - ACX does not support load balance parsing the payload on lag interface (no
> roadmap);
> - Some problems with arp flooding for the main CPU (initial JUNOS releases
> but I think they have solve it);
> - IRB on VPLS is not supported;
> - Not possible to monitor the real-time traffic on sub-interfaces using CLI
> (only with SNMP)
> 
> It is good to check with them to see if those functions would work ate some
> new releases (some day ...).
> 
And no " TE / TE++ and auto-bandwidth"?

-seems like ACX5448 is targeted as a CPE box or a L2 switch, 

...unsubscribe....

adam