[j-nsp] ACX5448 & ACX710

[Robert Raszuk]

CPE with its datasheet not even mentioning IPSec/DTLS hardware support ...
LOL what year do we have ?

On Wed, Jan 22, 2020 at 3:01 PM <adamv0025 at netconsultings.com> wrote:

> > Giuliano C. Medalha
> > Sent: Tuesday, January 21, 2020 8:24 PM
> >
> > Hello
> >
> > We did some initial lab teste using 5448 for a client and we have
> checked with
> > JUNIPER.
> >
> > The major problems we found for our client environment:
> >
> > - No support for FAT  (no roadmap);
> > - No support for Entropy Label  (no roadmap);
> > - No support for Output Policer or HQOS for VPLS / L2Circuit (no
> roadmap);
> > - ACX does not support load balance parsing the payload on lag interface
> (no
> > roadmap);
> > - Some problems with arp flooding for the main CPU (initial JUNOS
> releases
> > but I think they have solve it);
> > - IRB on VPLS is not supported;
> > - Not possible to monitor the real-time traffic on sub-interfaces using
> CLI
> > (only with SNMP)
> >
> > It is good to check with them to see if those functions would work ate
> some
> > new releases (some day ...).
> >
> And no " TE / TE++ and auto-bandwidth"?
>
> -seems like ACX5448 is targeted as a CPE box or a L2 switch,
>
> ...unsubscribe....
>
> adam
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>