[j-nsp] MX80 upgrade path 18.4R

[nikosietf at gmail.com]

Needless to mention here that if you do an upgrade directly to 18.4 ignoring
Juniper recommendations as someone has suggested if something goes wrong you
are on your own. 
So I would never suggest this for a massive deployment.

-----Original Message-----
From: juniper-nsp <juniper-nsp-bounces at puck.nether.net> On Behalf Of Mark
Tinka
Sent: Monday, June 15, 2020 9:28 AM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] MX80 upgrade path 18.4R



On 14/Jun/20 19:16, nikosietf at gmail.com wrote:
> It is true that the official path will tell you that you should follow 
> from
> 15 to 16 then 17 then 18 but I did around 30+ upgrades from 16 to 18 
> without any problems.
> >From 10 to 15 I guess you should go to 14 first but from 16 you can 
> >safely
> move to 18 without any issues. The ones I am talking about are 
> non-issue upgrades.

If I have to ring up 2014 again, I think you can go from 10 to 14, then to
16.

Once at 16, you should be able to skip all the way to current.

But yoh, that MX80 will be slow!

Mark.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp