[j-nsp] Slow RE path 20 x faster then PFE path

[Robert Raszuk]

Hi Mark,

Oh yes ... exact same config and same setup and even same hw (mx104) works
fine in other location giving consistent 1 ms without IP options and mostly
1-3 ms with IP options - but that is all fine. Going to RE is always non
deterministic :)

Another interesting observation is that show command indicated services
inline input traffic over 33 Mpps zero output while total coming to the box
was at  that time 1 Mpps ....

Thx,
R.

On Mon, Mar 23, 2020 at 5:47 PM Mark Tinka <mark.tinka at seacom.mu> wrote:

>
>
> On 23/Mar/20 17:37, Saku Ytti wrote:
> > I'm not sure what you mean by 'PFE loops', this is single NPU
> > fabricless platform, all ports are local. The only way to delay packet
> > that long, is to send it to off-chip DRAM (delay buffer).
> >
> > But please update list once you figure it out.
>
> Just for giggles, Robert, are you able to test this with another Juniper
> platform (even if it's the MX80)?
>
> Mark.
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>