[j-nsp] NFX250 run down ?

[Thomas Scott]

I was looking at this earlier in the year for a universal CPE project -
this was what in my notes  had for bespoke installs of VNFs, but this was
on the NG version, I think the older NFX250 had a different method:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/nfx250-ng-configuring-vnfs.html

After  you've setup a VNF I think the command was something along the lines
of
    request virtual-network-function <vnf> start

Hope that helps, sorry I don't have much more hands on!

- Thomas Scott | mr.thomas.scott at gmail.com


On Thu, Nov 19, 2020 at 12:06 PM Chris Cappuccio <chris at nmedia.net> wrote:

> I have an NFX250 here to play with and I'm wondering how do I get a JunOS
> VM to start? There is some kind of start up documentation from Juniper that
> basically says to point the box to your Network Services Orchestrator or
> whatever, but I don't have one of those. I am still in the bespoke
> configuration mode, hand crafted, light flavor.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>