[j-nsp] user defined variables from radius

[Wojciech Janiszewski]

AFAIK you can use them with Radius attributes 26-65 / 26-66 to activate
service with dynamic parameters, which take the string like
"dynamic-profile-name(variable1, variable2, ...)".
The same can be done through CLI for testing purposes

Regards,
Wojciech

sob., 28 lis 2020, 03:16 użytkownik Baldur Norddahl <baldur at gigabit.dk>
napisał:

> Hello
>
> Under "dynamic-profile xxx variables" I can configure user defined
> variables. I get the impression that somehow these variables can be filled
> in by radius but how? Radius attributes are to my knowledge predefined.
>
> Say I create a variable called "foobar" - what would I do with my
> freeradius config to supply that variable?
>
> Thanks,
>
> Baldur
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>